Loos & Co. Seismic Cable Bracing

Loos &amp; Co.’s Seismic Cable Bracing is ideally suited to cost-effectively satisfy new codes and standards provisions on earthquake resistance of architectural, mechanical and electrical components and systems.

Loos & Co.’s Seismic Cable Bracing is ideally suited to cost-effectively satisfy new codes and standards provisions on earthquake resistance of architectural, mechanical and electrical components and systems.

LOOS&CO

Dkm İnşaat

Boyuna Sismik Sınırlandırma Desteği  Yangın tesisatı ana hatlarında çaptan bağımsız olmak üzere boyuna askılama desteği sağlanmalıdır. DN65 ve üzeri branşman hatlarında boyuna askılama desteği sağlanmalıdır.  Boyuna askılamalar arasındaki mesafe 24mt'den fazla olmamalıdır.  Hatta kullanılacak son boyuna askı ile hat sonu mesafesi 12mt'yi geçmemelidir. Enine Sismik Sınırlandırma Desteği  Yangın tesisatı ana hatlarında çaptan bağımsız olmak üzere enine askılama desteği sağlanmalıdır. DN65 ve üzeri branşman hatlarında enine askılama desteği sağlanmalıdır.  Enine askılamalar arasındaki mesafe 12mt'den fazla olmamalıdır.  Son enlemesine askılama noktası ile hat bitiş veya dönüş noktası arasındaki mesafe maksimum 1,8mt’yi aşmamalıdır.  4 Yönlü Sismik Sınırlandırma Desteği  Uzunluğu 1m'yi aşan düşey borularının üst kısmında dört yönlü bir destek bulunmalıdır.  Yangın ana hatları kat girişlerinde 4 yönlü sismik sınırlandırma desteği maksimum 0,6mt'de yapılmalıdır.  Düşey borularda 8mt aralıklarla 4 yönlü sismik sınırlandırma desteği yapılmalıdır.

NSV 

other

Other

none

One-Page

The beam structure attachment is used to attach the seismic system to a beam structure. Mainly used when a seismic anchor cannot be used or welding is not allowed.● Material : Rolled steel ● Specification : 10mm ~ 32mm<figure class="table"><table><tbody><tr><td>&nbsp;</td><td>&nbsp;</td><td colspan="4">&nbsp;</td><td>&nbsp;</td></tr><tr><td rowspan="2">Model Name</td><td rowspan="2">Pipe Diameter</td><td colspan="4">Rated load per installation angle</td><td rowspan="2">KFI Certificate No,</td></tr><tr><td>30°</td><td>45°</td><td>60°</td><td>90°</td></tr><tr><td rowspan="7">ND-50</td><td>50A</td><td rowspan="4">3,559</td><td rowspan="4">5,032</td><td rowspan="4">6,163</td><td rowspan="4">7,117</td><td rowspan="7">Beotim 18-20</td></tr><tr><td>65A</td></tr><tr><td>80A</td></tr><tr><td>100A</td></tr><tr><td>125A</td><td rowspan="3">4,481</td><td rowspan="3">6,337</td><td rowspan="3">7,762</td><td rowspan="3">8,963</td></tr><tr><td>150A</td></tr><tr><td>200A</td></tr></tbody></table></figure>

UL / FM ONAYLI SİSMİK KORUMA ND-50

ND-50 

ND-50 Beam Structure Attachment

Structure attachment of sway bracing system used with manufacturer’s ND-10 (adapter) or ND-50 (beam structure attachment) Compose sway bracing system with Sch. pipe. Material Spheroidal graphite cast iron <table border="1"><thead><tr><th style="border:1px solid #000;border-collapse:collapse">Model Name</th><th style="border:1px solid #000;border-collapse:collapse">Sch #40 Pipe</th></tr></thead><tbody><tr><td style="border:1px solid #000;border-collapse:collapse">ND-30A</td><td style="border:1px solid #000;border-collapse:collapse">25A</td></tr><tr><td style="border:1px solid #000;border-collapse:collapse">ND-30B</td><td style="border:1px solid #000;border-collapse:collapse">32A</td></tr></tbody></table>

ND-30A/B

ND-30A/B Structure Attachment

Pipe clamp of sway bracing used with manufacturer’s ND-10 (adapter) or ND-40 (swivel adapter) Compose sway bracing system with Sch. pipeMaterial : Spheroidal graphite cast iron<figure class="table"><table><tbody><tr><th>Model name</th><th>Applicable pipe diameter</th><th>Remarks</th></tr><tr><th>ND-20</th><th>32~200A</th><th>general fire protection system</th></tr><tr><th>ND-21</th><th>40~100A</th><th>CPVC</th></tr></tbody></table></figure>&nbsp;

ND-20/21

ND-20/21 Pipe Clamp

Adapter for sway bracing used with manufacturer’s ND-30 (structure attachment) or ND-20 (pipe clamp) Compose sway bracing system with Sch. pipe<figure class="table"><table><tbody><tr><td>MODEL NAME</td><td>&nbsp; &nbsp;Sch #40 Pipe</td></tr><tr><td>ND-10A</td><td>&nbsp; &nbsp; &nbsp; 25A</td></tr><tr><td>ND-10B</td><td>&nbsp; &nbsp; &nbsp; 32A</td></tr></tbody></table></figure>

UL / FM ONAYLI SİSMİK KORUMA

ND-10A/B

ND-10 A/B Adapter

D-PVC

●System components① ND-30 A/B (structure attachment) ② ND-20 (pipe clamp) ③ ND-10 A/B (adapter) ④ NP-25A/32A Sch. #40 pipe ⑤ M12 seismic anchor bolt 1) Longitudinal sway bracing shall be provided on all feed and cross mains regardless of size and it shall be excluded for all branch lines and other piping. 2) Spacing shall not exceed a maximum interval of 24m and the distance between the last brace and the end of the pipe shall not exceed 12m.● Slenderness ratio (L/r) : Less than 300mm (L: System length, r : Min. rotation radius)Min. embedment depth of anchor bolt : 50mm

ND-V

ND-V Sway Bracing (Longitudinal)

index

British Zip-Clip is a manufacturer of steel cable suspension and seismic protection sets that offer fast and easy installation in HVAC, mechanical and electrical systems. The company's locking parts are UL approved and tested by many independent international organizations and laboratories.

Zip-Clip

100% upcycling solutions in Impact Sound Insulation and Airborne Sound Insulation.

<ul><li>It is a source making periodic vibrations in a flexible medium, causing changes in the equilibrium pressure of the medium and transmitting these pressure changes to distant points of the medium with a constant speed and a certain phase difference.</li><li>Sound can originate and propagate in solids, liquids and gases. Since the speed of sound propagation will vary according to the characteristics of the environment, where the sound is born becomes important in terms of the measures to be taken.</li><li>Sounds Born in Air: The vibrations of a sound source pass into the air and spread in the air. Live sounds, thunder, TV sound, music sound, etc.</li><li>Solid Sounds: The vibrations of a sound source are born and propagated in a solid. Plumbing, ventilation, generator, step sounds, etc.</li><li>TUNEX, the sound insulation product group we have developed with our experience and expertise in sound insulation, prevents sound transmission in buildings at the highest level.</li></ul>

In 2015, we produced the first TUNEX impact sound insulation mattress by recycling rubber foam thermal insulation material.

Sound Insulation Tunex | DKM Construction & Consultancy

In 2015, as a result of our long R&D studies, we produced the first Tunex impact sound insulation underlay by recycling rubber foam thermal insulation material. In the light of the continuation of our studies, we expanded our product range by including end-of-life tires (ELL) in this upcycling production. We continue to offer upcycling solutions with the Tunex family consisting of impact sound insulation underlay, airborne sound insulation underlay, heavy sound barrier, tapes and strips.

Tunex

With Rezonex, Vibration is Under Control!

In modern buildings, comfort needs are provided with many different mechanical and electrical equipment. The rotating parts and motors of mechanical and electrical equipment generate vibrations at different rates at different operating speeds.
 These vibrations and the noise emitted throughout the building cause loss of comfort and adversely affect the lifetime of the devices. It is inevitable to provide vibration isolation with spring or rubber based vibration absorbing isolators and systems consisting of hangers and rubber pads.

After REZONEX MTA and YDA, which we started to produce for vibration control, we have turned it into a complete solution package for vibration with ceiling and wall hangers.

Vibration Control Rezonex | DKM Construction & Consultancy

In 2016, we started to produce a family of vibration isolation products consisting of modular rubber pads and floating floor feet for vibration isolation solutions, which we have turned into a complete solution package for vibration with ceiling and wall hangers.

Rezonex

100% domestic and effective solutions to seismic protection needs in all non-structural compounds.

In earthquake zone countries, certain precautions should be taken in the installation of mechanical and electrical installations as well as in the statics of the building. Seismic protection is very important in mechanical and electrical installation design and application. The basis of seismic protection in installations is based on the fact that equipment, pipes, ducts and similar non-structural systems should not be displaced more than a certain amount within the structure, thus preventing them from damaging themselves and other installation and building components around them.

With our SISMEX branded products, we offer local and effective solutions to seismic protection needs in non-structural components.

Seismic Proteciont Product Sismex | DKM Construction & Consultancy

We offer 100% domestic and effective solutions to seismic protection needs in all non-structural components, including mechanical, electrical, architectural and furnishing, with our SISMEX brand product family, which we started production by completing the design and testing processes in 2020. Our SISMEX group products are tested and certified in ITU laboratories under the supervision of TUV according to ANSI-ASHRAE 171-2017 standard.

Sismex

Environmental Noise Under Control!

Sound walls, acoustic shutters or silencers are designed with sound cassettes to reduce environmental noise. The cassettes, which provide a high level of sound absorption (noise reduction) and transmission loss (noise blocking), are designed by our engineers according to the place of use, the characteristics of the sound source and the sound level to be reduced.

Soundex products are designed and specially designed by our engineers according to the characteristics of the sound source and the sound level to be reduced.

Environmental Noise Control Soundex | DKM Construction & Consultancy

Industrial, commercial and environmental noise control is an important and often overlooked part of the design process. It requires knowledge and experience to design acoustic systems that achieve the required sound levels to ensure the comfort of building occupants while complying with local regulations. Barrier Wall Systems are modular and cost-effective systems. They are specially designed solutions for rooftop equipment, electrical transformer stations, oil and gas compressor stations, residential areas, loading docks, railways and airport noise.

Soundex

DKM SOUNDEX was used to create a sound wall from DKM Construction &amp; Consultancy products in the 40 Bleecker Street project, which is a 12-floor residential building located on the corner of Mulberry and Bleecker streets in NoHo, New York, USA.

SOUNDEX sound wall were used for 40 Bleecker Street project in Mulberry and Bleecker streets in New York

40 Bleecker Street | DKM Construction & Consultancy

NEW YORK - USA

40 BLEECKER STREET

TUNEX Impact Sound Insulation Membrane from DKM Construction &amp; Consultancy products was used under the screed for sound insulation between floors in the 25-floor The Crown Building in Manhattan, New York.

TUNEX Impact Sound Insulation Underlay  was used under the screed for sound insulation between floors in the 25-floor The Crown Building in New York.

The Crown Building | DKM Construction & Consultancy

THE CROWN BUILDING

In the Qatar Al Thumama Stadium project, which includes 40,000 net spectator seats and was designed to meet FIFA standards in Tournament Mode, seismic protection, vibration and impact control of non-structural elements were provided by DKM Construction &amp; Consultancy.

Qatar Al Thumama Stadium project, seismic protection, vibration and control of nonstructural elements were provided by DKM Construction & Consultancy.

Qatar Al Thumama Stadium | DKM Construction & Consultancy

DOHA-QATAR

QATAR AL THUMAMA STADIUM

In the Portonovi Hotel project in Montenegro, seismic protection, vibration and impact control of non-structural elements were provided by DKM Construction &amp; Consultancy.

In the Portonovi Hotel, seismic protection, vibration and impact control of nonstructural elements were provided by DKM Construction & Consultancy

Montenegro Portonovi Hotel | DKM Construction & Consultancy

KUMBOR - MONTENEGRO

MONTENEGRO PORTONOVI HOTEL

Tunex Impact Sound Insulation Membrane was used under the screed between floors, one of the DKM Construction &amp; Consultancy products, in the Rocks Hotel project located in Kyrenia, Cyprus.

Tunex Impact Sound Insulation Underlay was used under the screed between floor in the Rocks Hotel project located in Kyrenia, Cyprus.

Rocks Hotel | DKM Construction & Consultancy

KYRENIA - CYPRUS

ROCKS HOTEL

In the Azerbaijan Baku and Gökçay Data Center project, seismic protection and vibration control of non-structural elements were provided by DKM Construction &amp; Consultancy.

In the Baku and Gökçay Data Center seismic protection and vibration control of nonstructural elements were provided by DKM Construction & Consultancy.

Azerbaijan Baku and Gökçay Data Center | DKM Construction & Consultancy

BAKU-AZERBAIJAN

AZERBAIJAN BAKU AND GÖKÇAY DATA CENTER

Missoni Baia, a brand new and ambitious project in Miami, USA, is a luxury residential project with 252 apartments on the coast of Biscayne Bay in the Edgewater region.Tunex products from DKM Construction &amp; Consultancy products were used for impact sound insulation on the floating floors of the fitness areas of the project, which is one of the most prestigious buildings in the city.

Tunex products from DKM Construction & Consultancy products were used for impact sound insulation on the floating floors of the fitness areas of the project

Missoni Baia | DKM Construction & Consultancy

EDGEWATER - MIAMI

MISSONI BAIA

As part of a major redevelopment project in Malta, TUNEX Impact Sound Insulation Membrane and TUNEX Acoustic Tapes from DKM Construction &amp; Consulting products were used for sound insulation between floors in the 31-floor Mercury Tower project designed by Zaha Hadid Architects.

As part of a major redevelopment project in Malta,TUNEX products were used for sound insulation between floors

Mercury Tower | DKM Construction & Consultancy

MALTA

MERCURY TOWER

It is a US Consulate project in Algeria.DKM Construction products (REZONEX Modular Vibration Absorber, Zip-Clip Seismic Suspension Sets) were used in the project, and seismic protection and vibration control of non-structural elements were also provided by DKM Construction.Professional Engineer (PE) approvals were obtained for the seismic protection projects prepared.

REZONEX Modular Vibration Absorber were used in the project Seismic protection & vibration control of nonstructural elements provided by DKM Construction.

Algeria American Consulate | DKM Construction & Consultancy

ALGERIA

ALGERIA AMERICAN CONSULATE

Iraq is a US Consulate project in Baghdad.DKM Construction products (REZONEX Modular Vibration Absorber, Zip-Clip Seismic Suspension Sets) were used in the project, and seismic protection and vibration control of non-structural elements were also provided by DKM Construction.Professional Engineer (PE) approvals were obtained for the seismic protection projects prepared.

The US Consulate project in Baghdad, using DKM Construction products for seismic protection and vibration control. PE approvals obtained.

Iraq American Consulate | DKM Construction & Consultancy

IRAQ

IRAQ AMERICAN CONSULATE

It is a US Consulate project in Afghanistan.DKM Construction products (REZONEX Modular Vibration Absorber, Zip-Clip Seismic Suspension Sets) were used in the project, and seismic protection and vibration control of non-structural elements were also provided by DKM Construction.Professional Engineer (PE) approvals were obtained for the seismic protection projects prepared.

Professional Engineer approvals were obtained for seismic protection projects, seismic protection and vibration control of non-structural elements were provided with DKM products.

Afghanistan American Consulate | DKM Construction & Consultancy

AFGHANISTAN

AFGHANISTAN AMERICAN CONSULATE

It is a 33-storey hotel and residence project in Baku, Azerbaijan.DKM Construction products (TUNEX Impact Sound Insulation Membrane) were used under the screed for inter-floor sound insulation in the project.

It is a 33-storey hotel and residence project in Baku, Azerbaijan.

Baku Trump Tower | DKM Construction & Consultancy

BAKU TRUMP TOWER

It is a US Consulate project in Fiji.DKM Construction products (REZONEX Modular Vibration Absorber, Zip-Clip Seismic Suspension Sets) were used in the project, and seismic protection and vibration control of non-structural elements were also provided by DKM Construction.Professional Engineer (PE) approvals were obtained for the seismic protection projects prepared.

Fiji American Consulate | DKM Construction & Consultancy

FIJI

FIJI AMERICAN CONSULATE

It is a US Consulate project in Sudan.DKM Construction products (REZONEX Modular Vibration Absorber, Zip-Clip Seismic Suspension Sets) were used in the project, and seismic protection and vibration control of non-structural elements were also provided by DKM Construction.Professional Engineer (PE) approvals were obtained for the seismic protection projects prepared.

DKM Construction provided seismic protection and vibration control products for non-structural elements in the Sudan US Consulate project.

Sudan American Consulate | DKM Construction & Consultancy

SUDAN

SUDAN AMERICAN CONSULATE

It is a US Consulate project located in Nairobi.DKM Construction products (REZONEX Modular Vibration Absorber, Zip-Clip Seismic Suspension Sets) were used in the project, and seismic protection and vibration control of non-structural elements were also provided by DKM Construction.Professional Engineer (PE) approvals were obtained for the seismic protection projects prepared.

It is the US Consulate project located in Nairobi. Professional Engineer (PE) approvals were obtained for the seismic protection projects.

Nairobi American Consulate | DKM Construction & Consultancy

NAIROBI-KENIA

NAIROBI AMERICAN CONSULATE

It is a US Consulate project in Turkmenistan, Ashgabat.DKM Construction products (REZONEX Modular Vibration Absorber, Zip-Clip Seismic Suspension Sets) were used in the project, and seismic protection and vibration control of non-structural elements were also provided by DKM Construction.Professional Engineer (PE) approvals were obtained for the seismic protection projects prepared.

DKM products were used for seismic protection and vibration control of non-structural elements in the US Consulate project in Ashgabat, Turkmenistan.

Ashgabat American Consulate | DKM Construction & Consultancy

ASHGABAT-TURKMENISTAN

ASHGABAT AMERICAN CONSULATE

Greece is a US Consulate project in Athens.DKM Construction products (REZONEX Modular Vibration Absorber, Zip-Clip Seismic Suspension Sets) were used in the project, and seismic protection and vibration control of non-structural elements were also provided by DKM Construction.Professional Engineer (PE) approvals were obtained for the seismic protection projects prepared.

It is the US Consulate project located in Athens, Greece. DKM products REZONEX MTA and Zip-Clip Seismic Hanger Sets were used in the project. 

Athens American Consulate | DKM Construction & Consultancy

ATHEENS-GREECE

ATHENS AMERICAN CONSULATE

The "Crescent Development Project" is an office-housing project, part of which includes the "Crescent Hotel" located on the Baku coast and located on an artificial island.DKM Construction products (TUNEX Impact Sound Insulation Membrane) were used for inter-floor sound insulation in the project.

DKM Construction products TUNEX Impact Sound Insulation Underlay were used for sound insulation between floors in the project.

Crescent Development City Tower | DKM Construction & Consultancy

CRESCENT DEVELOPMENT CITY TOWER

Family Mall Duhok is a shopping center project with retail stores, cafes and restaurants, 8 movie theaters, entertainment center, entertainment center, bowling hall, and ice skating area on 3 floors located in Duhok Iraq with a leasable area of 50.000 m².Seismic protection and vibration control of non-structural elements in the project were provided by DKM Construction.

Family Mall Duhok is a shopping center project with retail stores, cafes and restaurants, 8 movie theaters, entertainment center, entertainment center, bowling hall, and ice skating area on 3 floors located in Duhok Iraq with a leasable area of 50.000 m².

Duhok Family Mall | DKM Construction & Consultancy

DUHOK-IRAQ

DUHOK FAMILY MALL

The Ministry of Taxes Headquarters Building Construction consists of an office structure (Tower) with 168 m high (44.270 m2 construction area) working areas, gymnasium, restaurant and accommodation areas consisting of 2 basements and 31 normal floors, and a Podium structure consisting of a conference hall, cafeteria and lobby. . While the project reflects the energetic spirit of Baku, it is an exceptional structure that will meet the needs of the ministry employees.DKM Construction products (REZONEX Modular Vibration Absorber, Zip-Clip Seismic Suspension Sets) were used in the project, and seismic protection and vibration control of non-structural elements were also provided by DKM Construction.

The Headquarters Building of the Azerbaijan Ministry of Taxes reflects the energetic spirit of Baku and meets the needs of the ministry's employees.

Azerbaijan Ministry of Taxes (Mot) | DKM Construction & Consultancy

AZERBAIJAN MINISTRY OF TAXES (MOT)

It is a first-class R&amp;D complex project located on a total area of 40,000 m2 in Doha, Qatar.Seismic protection and vibration control of non-structural elements in the project were provided by DKM Construction.

R&D complex project located in Qatar. Seismic protection and vibration control of non-structural elements were provided by DKM Construction.

Qatar Foundation Research & Development Complex | DKM Construction & Consultancy

QATAR

QATAR FOUNDATION RESEARCH &DEVELOPMENT COMPLEX

It is an international relations university project established under the Azerbaijan Ministry of Foreign Affairs in March 2006 under the name of Azerbaijan Diplomatic Academy.DKM Construction products (Zip-Clip Seismic Suspension Sets) were used in the project, and seismic protection and vibration control of non-structural elements were also provided by DKM Construction.

Seismic protection and vibration control of non-structural elements in the Azerbaijan International Relations University project were provided by DKM.

Baku Ada University | DKM Construction & Consultancy

BAKU ADA UNIVERSITY

It is a 301-room hotel project with a construction area of 56,000 m2 located in Tashkent, Uzbekistan.DKM Construction products (REZONEX Modular Vibration Absorber) were used in the project and seismic protection and vibration control of non-structural elements were also provided by DKM Construction.

In the Tashkent Uzbekistan Hyatt Regency project, REZONEX MTA was used and seismic protection and vibration control were provided by DKM.

Tashkent Hyatt Regency | DKM Construction & Consultancy

TASHKENT-UZBEKISTAN

TASHKENT HYATT REGENCY

Le Meridien Hotel Batumi is a 230-bed and 110-room hotel project located in Batumi, Georgia.DKM Construction products (TUNEX Impact Sound Insulation Membrane) were used for inter-floor sound insulation in the project, and seismic protection and vibration control of non-structural elements were also provided by DKM Construction.

DKM TUNEX Impact Sound Insulation Mattress was used for sound insulation between floors in Le Meridien Hotel Batumi project in Batumi, Georgia.

Le Meridien Hotel | DKM Construction & Consultancy

BATUMI-GEORGIA

LE MERIDIEN HOTEL

It is a US Consulate project in Nepal.DKM Construction products (REZONEX Modular Vibration Absorber, Zip-Clip Seismic Suspension Sets) were used in the project, and seismic protection and vibration control of non-structural elements were also provided by DKM Construction.Professional Engineer (PE) approvals were obtained for the seismic protection projects prepared.

Products